# @(#) $Revision: 70.10 $
##################################################################
#								 #
#	   disktab:  Data Base and Informational File		 #
#	       for both HP-IB (CS/80, Amigo) and SCSI discs	 #
#		      For use with:  newfs			 #
#								 #
#	---> For the Series 200 / 300 / 400 AND 700 ONLY <---	 #
#								 #
##################################################################
#								 #
# PRELIMINARY:							 #
#	     All discs, including fixed (hard) discs and all	 #
#	     removable media, must be formatted before they can	 #
#	     be used.  Formatting is the process of preparing	 #
#	     a new disc to receive information and assuring	 #
#	     media integrity.					 #
#								 #
#	     To format an HP-UX disc,  use the HP-UX command:	 #
#		       %  mediainit				 #
#								 #
#	IMPORTANT: Some discs require an interleave different	 #
#	     than one (1).  This file contains information to	 #
#	     help you make the correct choice.	An improper	 #
#	     interleave could have a dramatic impact on		 #
#	     performance.					 #
#								 #
#								 #
# GENERAL:   Disktab is a simple database which describes disc	 #
#	     geometries and disc section characteristics.	 #
#	     Entries consist of a number of fields, separated	 #
#	     by ':'.  The first entry for each disc gives the	 #
#	     name(s) which are known for the disc, separated	 #
#	     by '|' characters.	 The next field is informational #
#	     and is unused by newfs.  Sectors are of size	 #
#	     DEV_BSIZE = 1024 bytes.				 #
#								 #
#	     The entries in this file are used as input to newfs #
#	     E.g. to make a file system for an HP7945:		 #
#								 #
#		   % newfs  /dev/rdsk/r7945  hp7945		 #
#								 #
#	     Most discs have some space reserved for the swap	 #
#	     area.  For instance, 10 MBytes is reserved in the	 #
#	     above example.  The amount of disc space required	 #
#	     by a user may be different from the default amount, #
#	     and you may wish to specify your own parameters.	 #
#	     See the section below on creating your own disktab	 #
#	     entry.						 #
#								 #
#	     NOTE:  On the Series 700 the boot area is taken	 #
#	     from swap space.  If you are making the device	 #
#	     bootable, you should be aware that there will	 #
#	     actually be less swap available on the device than	 #
#	     expected.  As a result of this dependency, all	 #
#	     entries in this file which were formerly referred to#
#	     as "reserved for swap" are now referred to as	 #
#	     "reserved for swap & boot".  The "*_noswap" entries #
#	     have likewise been changed to "*_noreserve" to 	 #
#	     reflect the fact that "reserved" area refers to	 #
#	     swap and boot.					 #
#								 #
#	     An entry for most discs is also provided that does	 #
#	     not reserve any space for swap or boot (the 	 #
#	     "noreserve" suffix).  The file system uses the	 #
#	     entire disc.  Remember -- HP-UX REQUIRES a minimum  #
#	     of 2 MBytes of swap.				 #
#								 #
#	     Most disk drives provide optimal file system	 #
#	     throughput with the default 4 ms value for rotdelay.#
#	     Exceptions are noted in the individual disktab 	 #
#	     entries.  Use tunefs(1M) or the file system 	 #
#	     parameter screen of the install process to change.	 #
#								 #
##################################################################
#  DISK GEOMETRY AND PARTITION LAYOUT TABLES.			 #
#  Key:								 #
#	(Leading field is name -- can be any string)		 #
#	ty	 Information about the disk (informational only) #
#	ns	 number of 1k sectors/track			 #
#	nt	 number of tracks/cylinder			 #
#	nc	 number of cylinders/disk			 #
#	s0	 size of file system in 1k blocks		 #
#	b0	 block size in bytes				 #
#			 (only 8192 or 4096 supported)		 #
#	f0	 fragment sizes in bytes			 #
#		      (1K, 2K, or 4K are supported)		 #
#	se	 #bytes/physical sector	    (informational only) #
#	rm	 rpm (rotational speed of platters)		 #
##################################################################
# EXPLANATION:							 #
#	  s0 = ns * nt * nc					 #
#	  Sectors not allocated to the file system will be	 #
#	  used in the swap area.  If no swap is required,  s0	 #
#	  represents the actual amount of disc space available	 #
#	  on the disc.	In general, any space reserved for swap	 #
#	  must be in increments of 2 megabytes	i.e.  swap will	 #
#	  be utilized in multiples of:				 #
#	      2 * 1024 * 1024  ( = 2,097,152 bytes )		 #
#								 #
#	  This guideline should suffice for almost all users.	 #
#	  If you anticipate creating processes that will have a	 #
#	  heap space larger than 116 MBytes,  you will need to	 #
#	  create a swap space that is a multiple of DMMAX.	 #
#	  (See System Parameters - Table D.1 in the HP-UX System #
#	  Administrators Manual.)				 #
#								 #
##################################################################
#								 #
# GENERAL GUIDELINES (and HINTS) for CREATING NEW ENTRIES:	 #
#	- How much swap is required				 #
#	- Swap must be reserved in multiples of 2 megabytes	 #
#	- The O/S needs some swap to run			 #
#	- An attempt to make ns a multiple of b0 will		 #
#	  enhance performance.	At a minimum, attempt to	 #
#	  make it a multiple of the fragment size (f0).		 #
#	- diskinfo(1m) is a useful utility for determining	 #
#	  the parameters necessary to make disctab entries.	 #
#								 #
#	An entry should have a unique name, and conform		 #
#	approximately to the following skeleton:		 #
#								 #
#	 hpXXXX:\						 #
#		:how much swap:ns#X:nt#X:nc#X:\			 #
#		:s0#X:b0#8192:f0#1024:\				 #
#		:se#X:rm#X:					 #
#								 #
#	where you will need to fill in values for 'X'.	b0 is	 #
#	almost always 8192, and f0 is 1024, although you can	 #
#	change this also.					 #
#								 #
#	ns#X  must be in multiples of 1k.  We must sometimes	 #
#	then "fudge" the numbers.  Example: A gray microfloppy	 #
#	formatted with format option 2 has this geometry:	 #
#	   - 512 bytes/sector					 #
#	   -   9 sectors/track					 #
#	   -  77 tracks/surface					 #
#	   -   2 surfaces					 #
#								 #
#	We have to fool option 2, instead of 9 sectors of 512	 #
#	bytes with 2 heads, we specified 9 sectors of 1K with	 #
#	1 head (ns# REQUIRES 1K).  Here is our entry:		 #
#								 #
#	hp9122_F2:\						 #
#	:format option 2:ns#9:nt#1:nc#77:\			 #
#	:s0#693:b0#8192:f0#1024:\				 #
#	:se#512:rm#600:						 #
#								 #
#	-> When Possible - Start with an existing entry <-	 #
#								 #
##################################################################
# Example of 'mknod' commands					 #
#	SHARED controller units:				 #
#	hp7946 at bus address 3 and select code 14 (hex 'e')	 #
#	(The disk and tape both share the same controller.	 #
#	 The disk is at unit 0, while the tape is at unit 1)	 #
#								 #
#	mknod /dev/dsk/7946  b 0 0x0e0300  /* hard disc */	 #
#			     ^ represents block device		 #
#								 #
#	mknod /dev/rdsk/r7946 c 4 0x0e0300  /* hard disc */	 #
#			      ^ represents character device	 #
#								 #
#	mknod /dev/rct/rct c 4 0x0e0310	  /* cartridge tape */	 #
#			     ^ 0,4 are for CS/80 or SS/80 discs	 #
#								 #
#	mknod /dev/ct/ct  b 0 0x0e0310	/* cartridge tape */	 #
#								 #
#	hp9133L at bus address 0 and on the Internal HP-IB	 #
#	The 9133L has a disk at unit 0 and a 3.5" microfloppy	 #
#		    at unit 1					 #
#	mknod /dev/dsk/9133    b 0 0x070000  /* hard disc */	 #
#	mknod /dev/rdsk/r9133  c 0 0x070000			 #
#	mknod /dev/dsk/md      b 0 0x070010 /* 3.5" microdisc */ #
#	mknod /dev/rdsk/rmd    c 4 0x070010			 #
#								 #
#	SEPARATE controller units				 #
#	Be careful: the 7912/4 drives come in two flavors:	 #
#	separate controllers, or shared controllers.  This	 #
#	example is for *separate* controllers.			 #
#	hp7914 disc at bus address 0 and select code 14		 #
#	hp7914 cartridge tape at bus address 1 and		 #
#		select code 14					 #
#	mknod /dev/dsk/7914   b 0 0x0e0000  /* hard disc */	 #
#	mknod /dev/rdsk/r7914 c 4 0x0e0000			 #
#	mknod /dev/rct c 4 0x0e0100  /* cartridge tape */	 #
#	mknod /dev/ct  b 0 0x0e0100				 #
#								 #
# Example of 'mknod' commands for SCSI discs			 #
#	HP7959S at bus address 2 and select code 14		 #
#	mknod /dev/dsk/7959S  b 7 0x0e0200			 #
#				^ major number for SCSI block	 #
#								 #
#	mknod /dev/rdsk/r7959S c 47 0x0e0200			 #
#				  ^ SCSI character device	 #
#								 #
# Example of 'mknod' commands for AMIGO discs			 #
#	hp7925 at bus address 7 and select code 14		 #
#	mknod /dev/dsk/7925  b 2 0x0e0700			 #
#			       ^ major number for Amigo block	 #
#								 #
#	mknod /dev/rdsk/r7925 c 11 0x0e0700			 #
#				 ^ Amigo character device	 #
#								 #
# Comments & Notes						 #
#	Remember that /dev/root (or /dev/dsk/0s0) is SPECIAL.	 #
#	To make this node type:					 #
#	      mknod /dev/root b 0xff 0xffffff			 #
#	When you LIST this device using "ls -l" , the operating	 #
#	system "magically" fills in the correct values.		 #
#								 #
# Notice how the minor number scheme is identical between all	 #
# interfaces.  Only the major numbers differ.  The purpose of	 #
# the major number is to "index" into the appropriate driver.	 #
#								 #
##################################################################
#
# 7907A Disc Drive: a 41 Mbyte (20.5 MByte fixed / 20.5 MByte
# removable cartridge) CS/80 disc drive;
# CS/80 Command Set
# Interleave 1
# Notes: Root file system must be on fixed cartridge
#	 if the 7907A is the sole system disc.
#	 Recommendation is to have swap only on fixed disc,
#	 and format removable media for "no swap"
hp7907:\
	:8 MB reserved for swap & boot:ns#16:nt#2:nc#371:\
	:s0#11872:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7907_noreserve|hp7907_noswap:\
	:no swap or boot:ns#16:nt#2:nc#627:\
	:s0#20064:b0#8192:f0#1024:\
	:se#256:rm#3600:
######################################################
# A 16.6 MByte fixed (winchester) disc and 1/4" 88140
# shared controller cartridge tape drive;
# CS/80 Command Set
# Interleave 1
hp7908:\
	:2 MB reserved for swap & boot:ns#8:nt#5:nc#352:\
	:s0#14080:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7908_noreserve|hp7908_noswap:\
	:no swap or boot:ns#8:nt#5:nc#404:\
	:s0#16160:b0#8192:f0#1024:\
	:se#256:rm#3600:
########################################################################
# A 28.1 MByte fixed (winchester) disc and 1/4" 88140 cartridge tape drive;
# CS/80 Command Set
# Interleave 1
# Notes: Accessing the cartridge tape unit on shared controllers (7911/2/4):
#	 The disc and the tape will be at the same bus address;
#	 the disc is at unit 0, while the tape is at unit 1.
#	 When a separate controller is used for the tape, the disc
#	 and tape will have distinct bus addresses.
hp7911:\
	:6 MB reserved for swap & boot:ns#16:nt#3:nc#444:\
	:s0#21312:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7911_noreserve|hp7911_noswap:\
	:no swap or boot:ns#16:nt#3:nc#572:\
	:s0#27456:b0#8192:f0#1024:\
	:se#256:rm#3600:
########################################################################
# A 65.6 MByte fixed (winchester) disc and 1/4" 88140 cartridge tape drive;
# CS/80 Command Set
# Interleave 1
hp7912:\
	:12 MB reserved for swap & boot:ns#16:nt#7:nc#462:\
	:s0#51744:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7912_noreserve|hp7912_noswap:\
	:no swap or boot:ns#16:nt#7:nc#572:\
	:s0#64064:b0#8192:f0#1024:\
	:se#256:rm#3600:
########################################################################
# A 132.1 MByte fixed (winchester) disc and 1/4" 88140 cartridge tape drive;
# (The 7914CT uses the 9144A cartridge tape unit.)
# CS/80 Command Set
# Interleave 1
hp7914:\
	:20 MB reserved for swap & boot:ns#16:nt#7:nc#969:\
	:s0#108528:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7914_30MB:\
	:30 MB reserved for swap & boot:ns#16:nt#7:nc#877:\
	:s0#98224:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7914_noreserve|hp7914_noswap:\
	:no swap or boot:ns#16:nt#7:nc#1152:\
	:s0#129024:b0#8192:f0#1024:\
	:se#256:rm#3600:
############################################################
#  The 7933H and 7935H are high-performance 404 MByte discs.
#  The 7935H has removable media
#  CS/80 Command Set
#  Interleave 1
#  Notes:  The size of the media is identical for both discs,
#	   hence the disctab entries are the same.
hp7933|hp7935:\
	:40 MB reserved for swap & boot:ns#23:nt#13:nc#1184:\
	:s0#354016:b0#8192:f0#1024:\
	:se#256:rm#2700:
hp7933_50MB|hp7935_50MB:\
	:50 MB reserved for swap & boot:ns#23:nt#13:nc#1149:\
	:s0#343551:b0#8192:f0#1024:\
	:se#256:rm#2700:
hp7933_noreserve|hp7933_noswap|hp7935_noreserve|hp7935_noswap:\
	:no swap or boot:ns#23:nt#13:nc#1321:\
	:s0#394979:b0#8192:f0#1024:\
	:se#256:rm#2700:
##################################################################
# The HP7936H and HP7937H are high-performance, high capacity discs.
# The 7936/37XP are untested on Series 300 HP-UX.
# CS/80 Command Set
# Interleave 1
#
# HP 7936 Specification Summary:
#	 HP7936	 has  307.7 MBytes
#	 256 Bytes/sector;
#	 123 Sectors/track;   7	 Heads;	  1396 Cylinders
#	 Total:	 1,201,956 256byte sectors
#
hp7936:\
	:32 MBytes reserved for swap & boot:ns#25:nt#7:nc#1528:\
	:s0#267400:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7936_46MB:\
	:46 MBytes reserved for swap & boot:ns#25:nt#7:nc#1446:\
	:s0#253050:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7936_noreserve|hp7936_noswap:\
	:no swap or boot:ns#25:nt#7:nc#1716:\
	:s0#300300:b0#8192:f0#1024:\
	:se#256:rm#3600:
# HP 7937 Specification Summary:
#	 HP7937	 has  571.4 MBytes
#	 256 Bytes/sector;
#	 123 Sectors/track;   13  Heads;   1396 Cylinders
#	 Total:	 2,232,204 256byte sectors
#
# The 7937S (SCSI) drive share the same geometry as the HP-IB drive,
# thus we can use the same entry described below.
#
hp7937|hp7937S|HP_7937S:\
	:48 MBytes reserved for swap & boot:ns#25:nt#16:nc#1272:\
	:s0#508800:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7937_64MB|hp7937S_64MB:\
	:64 MBytes reserved for swap & boot:ns#25:nt#16:nc#1231:\
	:s0#492400:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7937_80MB|hp7937S_80MB:\
	:80 MBytes reserved for swap & boot:ns#25:nt#16:nc#1190:\
	:s0#476000:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7937_96MB|hp7937S_96MB:\
	:96 MBytes reserved for swap & boot:ns#25:nt#16:nc#1149:\
	:s0#459600:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7937_noreserve|hp7937_noswap|hp7937S_noreserve|hp7937S_noswap:\
	:no swap or boot:ns#25:nt#16:nc#1395:\
	:s0#558000:b0#8192:f0#1024:\
	:se#256:rm#3600:
##############################################################
# The 7941A and 7942A are 23.8 MByte discs.  The 7942A has a
# built-in 9144 shared controller cartridge tape drive.
# CS/80 Command Set
# Interleave 1
# Notes: The sizes of the 7941 and 7942 are identical, hence the
#	 entries are the same.
#	 Both the disc drive and tape are at the same bus address.
#	 The disc is at unit 0, the tape is at unit 1.
#	 The minor number for the device file will reflect this difference.
hp7941|hp7942:\
	:4 MB reserved for swap & boot:ns#8:nt#3:nc#797:\
	:s0#19128:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7941_noreserve|hp7941_noswap|hp7942_noreserve|hp7942_noswap:\
	:no swap or boot:ns#8:nt#3:nc#968:\
	:s0#23232:b0#8192:f0#1024:\
	:se#256:rm#3600:
#
# The 7945A and 7946A are 55.5 MByte discs.  The 7946A has a
# built-in 9144 shared controller cartridge tape drive.
# CS/80 Command Set
# Interleave 1
# Notes: The sizes of the 7945 and 7946 are identical, hence the
#	 entries are the same.
#	 Both the disc drive and tape are at the same bus address.
#	 The disc is at unit 0, the tape is at unit 1.
hp7945|hp7946:\
	:10 MB reserved for swap & boot:ns#8:nt#7:nc#785:\
	:s0#43960:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7945_16MB|hp7946_16MB:\
	:16 MB reserved for swap & boot:ns#8:nt#7:nc#675:\
	:s0#37800:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7945_noreserve|hp7945_noswap|hp7946_noreserve|hp7946_noswap:\
	:no swap or boot:ns#8:nt#7:nc#968:\
	:s0#54208:b0#8192:f0#1024:\
	:se#256:rm#3600:
############################################################
# HP7957A and HP7958A are medium performance, fixed discs
# Interleave 1
#
# HP7957 has 81.7 MBytes
#	256 Bytes/sector
#	63 sectors/track;  5 heads (small);  1013 cylinders;
#	Total:	79773.75 1K sectors
hp7957:\
	:12 MBytes reserved for swap & boot:ns#11:nt#7:nc#876:\
	:s0#67452:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7957_20MB:\
	:20 MBytes reserved for swap & boot:ns#11:nt#7:nc#770:\
	:s0#59290:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7957_noreserve|hp7957_noswap:\
	:no swap or boot:ns#11:nt#7:nc#1036:\
	:s0#79772:b0#8192:f0#1024:\
	:se#256:rm#3600:
# HP7958 has 130.7 MBytes
#	256 Bytes/sector
#	63 sectors/track;  8 heads (small);  1013 cylinders;
#	Total:	127638 1K sectors
hp7958:\
	:20 MBytes reserved for swap & boot:ns#21:nt#6:nc#850:\
	:s0#107100:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7958_30MB:\
	:30 MBytes reserved for swap & boot:ns#21:nt#6:nc#769:\
	:s0#96894:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7958_noreserve|hp7958_noswap:\
	:no swap or boot:ns#21:nt#6:nc#1013:\
	:s0#127638:b0#8192:f0#1024:\
	:se#256:rm#3600:
################################################################
# HP7957B, HP7958, and HP7959B are a family of high performance,
# high capacity fixed discs.
# The same disc/controller assemblies are also available in the
# multi-mechanism 7961B, 7962B and 7963B discs, and as add-on
# mechanisms (97960-series) to any 7960-series disc.
# Interleave 1
#
# HP7957B has 82 MBytes
#	  256 Bytes/sector
#	  63 sectors/track;  4 heads;  1269 cylinders;
hp7957B|hp7961B|hp79571:\
	:12 MBytes reserved for swap & boot:ns#9:nt#7:nc#1073:\
	:s0#67599:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7957B_20MB:\
	:20 MBytes reserved for swap & boot:ns#9:nt#7:nc#943:\
	:s0#59409:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7957B_noreserve|hp7957B_noswap:\
	:no swap or boot:ns#9:nt#7:nc#1269:\
	:s0#79947:b0#8192:f0#1024:\
	:se#256:rm#3350:
# HP7958B has 152 MBytes
#	256 Bytes/sector
#	63 sectors/track;  6 heads;  1572 cylinders;
#	Total:	148554 1K sectors
hp7958B|hp7962B|hp79581|hp97962B:\
	:24 MBytes reserved for swap & boot:ns#21:nt#9:nc#655:\
	:s0#123795:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7958B_32MB:\
	:32 MBytes reserved for swap & boot:ns#21:nt#9:nc#612:\
	:s0#115668:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7958B_42MB:\
	:42 MBytes reserved for swap & boot:ns#21:nt#9:nc#558:\
	:s0#105462:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7958B_noreserve|hp7958B_noswap|hp97962B_noreserve|hp97962B_noswap:\
	:no swap or boot:ns#21:nt#9:nc#786:\
	:s0#148554:b0#8192:f0#1024:\
	:se#256:rm#3350:
# HP7959B has 304 MBytes
#	256 Bytes/sector
#	63 sectors/track;  12 heads;  1572 cylinders;
#	Total:	297108 1K sectors
hp7959B|hp7963B|hp97963B|hp79591:\
	:42 MBytes reserved for swap & boot:ns#21:nt#9:nc#1344:\
	:s0#254016:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7959B_50MB:\
	:50 MBytes reserved for swap & boot:ns#21:nt#9:nc#1301:\
	:s0#245889:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7959B_32MB:\
	:32 MBytes reserved for swap & boot:ns#21:nt#9:nc#1398:\
	:s0#264222:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7959B_noreserve|hp7959B_noswap|hp97963B_noreserve|hp97963B_noswap:\
	:no swap or boot:ns#21:nt#9:nc#1572:\
	:s0#297108:b0#8192:f0#1024:\
	:se#256:rm#3350:
# HP2200A has 335 MBytes
#	  256 Bytes/sector
#	  113 sectors/track;  8 heads;	1449 cylinders;
#	Total: 327474 1k sectors
hp2200A|hp335H|hp2200|hp22000:\
	:42 MBytes reserved for swap & boot:ns#113:nt#2:nc#1258:\
	:s0#284308:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp2200A_32MB|hp335H_32MB|hp22000_32MB:\
	:32 MBytes reserved for swap & boot:ns#113:nt#2:nc#1304:\
	:s0#294704:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp2200A_64MB|hp335H_64MB|hp22000_64MB:\
	:64 MBytes reserved for swap & boot:ns#113:nt#2:nc#1159:\
	:s0#261934:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp2200A_noreserve|hp2200A_noswap|hp335H_noreserve|hp335H_noswap:\
	:no swap or boot:ns#113:nt#2:nc#1449:\
	:s0#327474:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp22000_noreserve|hp22000_noswap:\
	:no swap or boot:ns#113:nt#2:nc#1449:\
	:s0#327474:b0#8192:f0#1024:\
	:se#256:rm#4002:
# HP2203A has 671 MBytes
#	  256 Bytes/sector
#	  113 sectors/track;  16 heads;	 1449 cylinders;
#	Total: 654948 1K sectors
hp2203A|hp670H|hp2203|hp22030:\
	:64 MBytes reserved for swap & boot:ns#113:nt#4:nc#1304:\
	:s0#589408:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp2203A_96MB|hp670H_96MB|hp22030_96MB:\
	:96 MBytes reserved for swap & boot:ns#113:nt#4:nc#1231:\
	:s0#556412:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp2203A_42MB|hp670H_42MB|hp22030_42MB:\
	:42 MBytes reserved for swap & boot:ns#113:nt#4:nc#1353:\
	:s0#611556:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp2203A_noreserve|hp2203A_noswap|hp670H_noreserve|hp670H_noswap:\
	:no swap or boot:ns#113:nt#4:nc#1449:\
	:s0#654948:b0#8192:f0#1024:\
	:se#256:rm#4002:
hp22030_noreserve|hp22030_noswap:\
	:no swap or boot:ns#113:nt#4:nc#1449:\
	:s0#654948:b0#8192:f0#1024:\
	:se#256:rm#4002:
###############################################
# The HP2212A is a SCSI Coyote II
# Total formatted capacity: 331 Mbytes
#	  512 Bytes/sector
#	  56 sectors/track;  8 heads;  1447 cylinders;
#	Total: 324128 1k sectors
hp2212A|HP_2212A|hp330S|hp97544S|HP_97544S:\
	:42 MBytes reserved for swap and boot:ns#28:nt#8:nc#1256:\
	:s0#281344:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2212A_32MB|hp2212A_32MB|hp330S_32MB:\
	:32 MBytes reserved for swap and boot:ns#28:nt#8:nc#1302:\
	:s0#291648:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2212A_64MB|hp2212A_64MB|hp330S_64MB:\
	:64 MBytes reserved for swap and boot:ns#28:nt#8:nc#1157:\
	:s0#259168:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2212A_126MB|hp2212A_126MB|hp330S_126MB:\
        :126 MBytes reserved for swap and boot:ns#28:nt#8:nc#871:\
        :s0#195104:b0#8192:f0#1024:\
        :se#512:rm#4002:
HP_2212A_noswap|hp2212A_noreserve|hp2212A_noswap|hp330S_noreserve|hp330S_noswap:\
	:no swap or boot:ns#28:nt#8:nc#1447:\
	:s0#324128:b0#8192:f0#1024:\
	:se#512:rm#4002:
###############################################
# The HP2213A is a SCSI Coyote II
# Total formatted capacity:  663 Mbytes
#	  512 Bytes/sector
#	  56 sectors/track;  16 heads;	1447 cylinders;
#	Total: 648256 1k sectors
HP_2213A|hp2213A|hp660S|hp97548S|HP_97548S|hp2213A_64MB|HP_2213A_64MB:\
	:64 MBytes reserved for swap & boot:ns#28:nt#16:nc#1302:\
	:s0#583296:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2213A_300MB|hp2213A_300MB|hp660S_300MB:\
        :300 MBbytes reserved for swap & boot:ns#28:nt#16:nc#763:\
        :s0#341824:b0#8192:f0#1024:\
        :se#512:rm#4002:
HP_2213A_96MB|hp2213A_96MB|hp660S_96MB:\
	:96 MBytes reserved for swap & boot:ns#28:nt#16:nc#1229:\
	:s0#550592:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2213A_42MB|hp2213A_42MB|hp660S_42MB:\
	:42 MBytes reserved for swap & boot:ns#28:nt#16:nc#1351:\
	:s0#605248:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2213A_noreserve|hp2213A_noreserve|HP_2213A_noswap|hp2213A_noswap|hp660S_noreserve|hp660S_noswap:\
	:no swap or boot:ns#28:nt#16:nc#1447:\
	:s0#648256:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2213A_120MB|hp2213A_120MB|hp660S_120MB:\
	:120 MBytes reserved for swap & boot:ns#28:nt#16:nc#1173:\
	:s0#525504:b0#8192:f0#1024:\
	:se#512:rm#4002:
HP_2213A_150MB|hp2213A_150MB|hp660S_150MB:\
	:150 MBytes reserved for swap & boot:ns#28:nt#16:nc#1104:\
	:s0#494592:b0#8192:f0#1024:\
	:se#512:rm#4002:
############################################################################
# A word about microfloppies ...					   #
# There are three (3) types of microfloppies available.			   #
# They are color-coded for ease of use:					   #
#	blue:  single-sided, standard-density (single-density)		   #
#	gray:  double-sided, standard-density				   #
#	black: double-sided, high-density     (double-density)		   #
#									   #
# "double-sided" means both sides of the microfloppy are used.		   #
# "high-density" means twice the number of sectors per track.		   #
#									   #
# Always "mediainit" before first using any microfloppy.		   #
# We recommend formatting ALL microfloppies with interleave 2.		   #
# Example: (interleave = 2, format option = 3)				   #
#	   # mediainit -i 2 -f 3 /dev/rdsk/9122				   #
#									   #
# In addition, there are six (6) format options available.  The format	   #
# options specify the logical geometry of the disc.  See details below.	   #
#									   #
#	------------------------------------------------------------	   #
#	Note that the same FORMAT OPTIONS are used for both standard	   #
#	and high density.  The selection of standard- or high-		   #
#	depends on the media type inserted (blue, gray, or black).	   #
#	HD floppies will always format with twice the capacity of	   #
#	single-density media.						   #
#	HD media should ONLY be used in 9122C drives (such as 9153C	   #
#	drives.	 I.e. DO NOT use in 9122D or 9122S drives.)		   #
#	------------------------------------------------------------	   #
#									   #
#	Format options 0, 1, 4 format the diskette with 256 byte sectors   #
#	Format option  2  formats the diskette with 512 byte sectors	   #
#	Format option  3  formats the diskette with 1024 byte sectors	   #
#	Format option  16 (sometimes called "IBM" style) uses 512 byte	   #
#			   sectors					   #
#	  ** note: the "IBM"-style format (option 16) is supported on	   #
#		   9153A (serial number prefix 2702A or higher),	   #
#		   and all 9153B and 9153C drives.			   #
# See below for more details.						   #
#									   #
############################################################################
# A word about microfloppy disc drives ...				   #
# The 9122 family of disc drives is a family of microfloppy units.	   #
# They are available as standalone units, such as the 9122D dual mechanism #
# drive, or integrated into disc drives, such as the 9133L or 9153 drives. #
# Here is a convenient guide for matching drives with mechanisms:	   #
# 9121 drives = blue diskettes only					   #
# 9122 drives = blue or gray diskettes					   #
# newer 9122 drives = blue, gray, or black diskettes (e.g. 9122C or 9153C) #
#									   #
# Note that the above color coding is for HP-supplied media only.	   #
#									   #
# 9122C/9153C drives can detect high density (black) discs via a sensor	   #
# hole in the black media.  Earlier drives will treat black media as	   #
# ordinary standard density, at a high error rate due to the higher	   #
# coercivity required to record on high density media.			   #
#									   #
# No drive can detect single- vs double-sided media.  The selection of	   #
# the correct format option is the operator's responsibility.		   #
#									   #
############################################################################
# The 9122D and 9122S are 788 KByte 3.5" double-sided flexible disc drives.
# The 9122D contains two (2) drives (at unit 0 and unit 1).
# SS/80 Protocol
# Interleave 2
# Notes:  Before a 3.5" flexible disc is used, it must be formatted.
#	  The format option determines the number of bytes/sector, and
#	  the total size of the disc.  We recommend format option 3,
#	  since it gives the maximum disc space per volume.
#
#	  USE GRAY DISKETTES ONLY !!	  USE GRAY DISKETTES ONLY !!
#			  Format Option (GRAY)
#	  Character	   0,1	    2	    3	    4	   16**
#
#	  capacity	  631K	  710K	  788K	  270K	  730K
#	  bytes/sector	  256	  512	  1024	  256	  512
#	  sectors/track	   16	   9	   5	   16	   9
#	  sides		   2	   2	   2	   1	   2
#	  cylinders	   77	   77	   77	   66	   80
#
#	  ** note: the "IBM"-style format (option 16) is supported on
#		   9153A, 9153B, and 9153C drives.
#
#	  The configuration reference manual contains the remaining details
#	  The flexible disc is too small to contain a swap area.
############################################################################
hp9122|hp9122_noreserve|hp9122_noswap|hp9122_F3_noreserve|hp9122_F3_noswap:\
	:format option 3:ns#5:nt#2:nc#77:\
	:s0#770:b0#8192:f0#1024:\
	:se#1024:rm#600:
hp9122_F0|hp9122_F0_noreserve|hp9122_F0_noswap:\
	:format option 0,1:ns#4:nt#2:nc#77:\
	:s0#616:b0#8192:f0#1024:\
	:se#256:rm#600:
hp9122_F1_noreserve|hp9122_F1_noswap:\
	:format option 0,1:ns#4:nt#2:nc#77:\
	:s0#616:b0#8192:f0#1024:\
	:se#256:rm#600:
#
#	We have to fool option 2 ... instead of 9 sectors of 512 bytes with
#	2 heads, we specified 9 sectors of 1K with 1 head (ns# REQUIRES 1K)
hp9122_F2|hp9122_F2_noreserve|hp9122_F2_noswap:\
	:format option 2:ns#9:nt#1:nc#77:\
	:s0#693:b0#8192:f0#1024:\
	:se#512:rm#600:
hp9122_F4|hp9122_F4_noreserve|hp9122_F4_noswap:\
	:format option 4:ns#4:nt#1:nc#66:\
	:s0#264:b0#8192:f0#1024:\
	:se#256:rm#600:
###########################################################################
# The 9122C is our nomenclature for the standard/high density 3.5"
# flexible disc drive built into the 9153C product.  The 9122C supports
# all 9121D/S and 9122D/S single- and double-sided standard density
# (1 Mbyte) formats.  This section lists only the high (2 Mbyte) formats.
#
# SS/80 Protocol
# Interleave 2
#
#	  Use ANY diskette you want.  The following options are for
#	  the HD media (black diskettes).
#	      (Put in a gray diskette, and the drive uses the ABOVE format
#	       table; put in a black diskette, the drive uses the table
#	       below.  You might imagine that the drive "knows" the color.)
#
#			  Format Option (BLACK)
#	  Character	 0,1,4	    2	    3	   16
#
#	  capacity	 1.26M	 1.42M	 1.58M	 1.47M
#	  bytes/sector	  256	  512	 1024	  512
#	  sectors/track	   32	   18	   10	   18
#	  sides		    2	    2	    2	    2
#	  cylinders	   77	   77	   77	   80
#
hp9122C|hp9122C_noreserve|hp9122C_noswap:\
	:format option 3:ns#10:nt#2:nc#77:\
	:s0#1540:b0#8192:f0#1024:\
	:se#1024:rm#300:
hp9122C_F3_noreserve|hp9122C_F3_noswap:\
	:format option 3:ns#10:nt#2:nc#77:\
	:s0#1540:b0#8192:f0#1024:\
	:se#1024:rm#300:
###########################################################################
# 3.5 inch flexible disk formats. These disktab entries are applicable to
# all 3.5 inch floppy devices. The floppy density and mediainit format
# option(s) which correspond to each disktab entry are specified in the
# first field of each entry. See floppy(7) for additional information
# about the media geometries of these floppy mediainit format options.
#
hp616|hp630:\
	:low density; format options 1,4:ns#4:nt#2:nc#77:\
	:s0#616:b0#8192:f0#1024:\
	:se#256:rm#600:
hp693|hp710:\
	:low density; format option 2:ns#9:nt#1:nc#77:\
	:s0#693:b0#8192:f0#1024:\
	:se#512:rm#300:
hp770|hp788:\
	:low density; format option 3:ns#5:nt#2:nc#77:\
	:s0#770:b0#8192:f0#1024:\
	:se#1024:rm#600:
ibm720:\
	:low density; format option 16:ns#9:nt#1:nc#80:\
	:s0#720:b0#8192:f0#1024:\
	:se#512:rm#300:
hp1232:\
	:high density; format options 1,4:ns#8:nt#2:nc#77:\
	:s0#1232:b0#8192:f0#1024:\
	:se#256:rm#600:
hp1386:\
	:high density; format option 2:ns#9:nt#2:nc#77:\
	:s0#1386:b0#8192:f0#1024:\
	:se#512:rm#600:
hp1540:\
	:high density; format option 3:ns#10:nt#2:nc#77:\
	:s0#1540:b0#8192:f0#1024:\
	:se#1024:rm#600:
ibm1440:\
	:high density; format option 16:ns#9:nt#2:nc#80:\
	:s0#1440:b0#8192:f0#1024:\
	:se#512:rm#600:
###########################################################################
# 5.25 inch flexible disk formats. These disktab entries are applicable to
# all 5.25 inch floppy devices. The floppy density and mediainit format
# option(s) which correspond to each disktab entry are specified in the
# first field of each entry. See floppy(7) for additional information
# about the media geometries of these floppy mediainit format options.
#
ibm1200:\
	:high density; format option 16:ns#15:nt#1:nc#80:\
	:s0#1200:b0#8192:f0#1024:\
	:se#512:rm#600:
#########################################################
# GENERAL INFORMATION for the 9133, 9134 and 9153 Drives:
# Important variables to consider:
#     - Is your device formatted for the correct interleave?
#	(See individual entries below.)
#     - Is your configuration switch set properly?
#     - Does your disc use 256 byte sectors, or 1024 byte sectors?
#	(Use diskinfo(1m) to find out.)
#     - Make sure you know the proper model number (e.g. 9133H is not
#	the same as 9133L, the 9153A is not a 9153B is not a 9153C, etc)
#	(Look at the label on the front (or rear) of your disc!)
#
# Each drive is supplied with a configuration switch (on the back panel)
# that allows you to partition your fixed disc into multiple volumes.  The
# individual volumes are accessed in HP-UX by specifying the appropriate
# numbered volume (coded in the least significant byte of the minor number).
# Do not confuse this switch with the bus address switch.  Entries are given
# only for switch setting 0 or 1 (i.e. the entire disc is accessed as one
# volume). Several configuration switches have special meanings -- check
# your operators manual for details.  We give a detailed example in the
# section for the 9153B disc drive.
#
##############################
# The 9133D and 9134D are 16.6 MByte fixed discs using option 001.
#			 (14.8 MBytes using 256 byte sectors)
# The 9133D contains a shared controller 9122S (the 3.5" microfloppy).
#	(Use hp9122 for formatting the microfloppy.)
# SS/80 Protocol
# Interleave:  consult following configuration matrix
#
#		   DMA	    no DMA
#      Internal	    4	      6
#      98625	    3	      5
#
# Notes:     The 9134D hard disc is identical to the 9133D disc.  Use the
#	     corresponding entries listed below. The 3.5" flexible disc drive
#	     on the 9133D is at unit 1 (the hard disc is at unit 0).
# Important: The 9133D can be configured with Option 001 (1024 byte sectors)
#	     or with 256 byte sectors.	The Option 001 is encouraged.
#	     Make sure the appropriate entry below is used.
# WARNING:   The 9133XV disk drive is UNSUPPORTED.  The following is
#	     for informational purposes only.
hp9133D|hp9134D:\
	:2 MB reserved for swap & boot, option 001:ns#9:nt#6:nc#263:\
	:s0#14202:b0#8192:f0#1024:\
	:se#1024:rm#3600:
hp9133D_noreserve|hp9133D_noswap|hp9134D_noreserve|hp9134D_noswap:\
	:no swap or boot, option 001:ns#9:nt#6:nc#301:\
	:s0#16254:b0#4096:f0#1024:\
	:se#1024:rm#3600:
#
hp9133D_256|hp9134D_256:\
	:2 MB reserved for swap & boot, 256 byte sectors:ns#8:nt#6:nc#259:\
	:s0#12432:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9133D_256_noreserve|hp9133D_256_noswap:\
	:no swap or boot, 256 byte sectors:ns#8:nt#6:nc#302:\
	:s0#14496:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9134D_256_noreserve|hp9134D_256_noswap:\
	:no swap or boot, 256 byte sectors:ns#8:nt#6:nc#302:\
	:s0#14496:b0#8192:f0#1024:\
	:se#256:rm#3600:
##############################
# The 9133H and 9134H are 22.3 MByte fixed discs using option 001.
#		       or 19.9 MBytes using 256 byte sectors.
# The 9133H contains a shared controller 9122S (the 3.5" microfloppy).
#	(Use hp9122 for formatting the microfloppy.)
# SS/80 protocol
# Interleave:  consult following configuration matrix
#
#		   DMA	    no DMA
#      Internal	    4	      6
#      98625	    3	      5
#
# Notes:     The 9134H hard disc is identical to the 9133H disc.  Use the
#	     corresponding entries listed below. The 3.5" flexible disc drive
#	     on the 9133H is at unit 1 (the hard disc is at unit 0).
# Important: The 9133H can be configured with Option 001 (1024 byte sectors)
#	     or with 256 byte sectors.	The Option 001 is encouraged.
#	     Make sure the appropriate entry below is used.
hp9133H|hp9134H:\
	:4 MB reserved for swap & boot, option 001:ns#9:nt#4:nc#492:\
	:s0#17712:b0#8192:f0#1024:\
	:se#1024:rm#3600:
hp9133H_noreserve|hp9133H_noswap|hp9134H_noreserve|hp9134H_noswap:\
	:no swap or boot, option 001:ns#9:nt#4:nc#606:\
	:s0#21816:b0#4096:f0#1024:\
	:se#1024:rm#3600:
hp9133H_256|hp9134H_256:\
	:4 MB reserved for swap & boot, 256 byte sectors:ns#8:nt#4:nc#480:\
	:s0#15360:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9133H_256_noreserve|hp9133H_256_noswap:\
	:no swap or boot, 256 byte sectors:ns#8:nt#4:nc#608:\
	:s0#19456:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9134H_256_noreserve|hp9134H_256_noswap:\
	:no swap or boot, 256 byte sectors:ns#8:nt#4:nc#608:\
	:s0#19456:b0#8192:f0#1024:\
	:se#256:rm#3600:
#######################################################
# The 9133L and 9134L are 44.7 MByte fixed discs using option 001.
#		       or 39.9 MByte discs using 256 byte sectors.
# The 9133L contains a shared controller 9122S (the 3.5" microfloppy).
#	(Use hp9122 for formatting the microfloppy.)
# SS/80 protocol
# Interleave:  consult following configuration matrix
#
#		   DMA	    no DMA
#      Internal	    4	      6
#      98625	    3	      5
#
# Notes:     The 9134L hard disc is identical to the 9133L disc.  Use the
#	     corresponding entries listed below. The 3.5" flexible disc drive
#	     on the 9133L is at unit 1 (the hard disc is at unit 0).
# Important: The 9133L can be configured with Option 001 (1024 byte sectors)
#	     or with 256 byte sectors.	The Option 001 is encouraged.
#	     Make sure the appropriate entry below is used.
hp9133L|hp9134L:\
	:8 MB reserved for swap & boot, option 001:ns#9:nt#5:nc#788:\
	:s0#35460:b0#8192:f0#1024:\
	:se#1024:rm#3600:
hp9133L_noreserve|hp9133L_noswap|hp9134L_noreserve|hp9134L_noswap:\
	:no swap or boot, option 001:ns#9:nt#5:nc#971:\
	:s0#43695:b0#4096:f0#1024:\
	:se#1024:rm#3600:
#
hp9133L_256|hp9134L_256:\
	:6 MB reserved for swap & boot, 256 byte sectors:ns#8:nt#5:nc#819:\
	:s0#32760:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9133L_256_noreserve|hp9133L_256_noswap:\
	:no swap or boot, 256 byte sectors:ns#8:nt#5:nc#973:\
	:s0#38920:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9134L_256_noreserve|hp9134L_256_noswap:\
	:no swap or boot, 256 byte sectors:ns#8:nt#5:nc#973:\
	:s0#38920:b0#8192:f0#1024:\
	:se#256:rm#3600:
##############################################################
# The 9153 family of drives contains three groups:	     #
#	- 9153						     #
#	- 9153A						     #
#	- 9153B						     #
#	- 9153C						     #
# Refer to the appropriate section below.		     #
##############################################################
# The 9153 and 9153A is a 10 MByte winchester disc with a built-in 3.5"
# double-sided 9122S flexible disc drive.
#	(See the hp9122 discussion above for formatting the microfloppy.)
# SS/80 Protocol
# Interleave:  refer to following configuration matrix
#
#		   DMA	    NO DMA
#      Internal	    2	      3
#      98625	    1	      2
#
hp9153A:\
	:2 MB reserved for swap & boot:ns#7:nt#2:nc#551:\
	:s0#7714:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9153A_noreserve|hp9153A_noswap:\
	:no swap or boot:ns#7:nt#2:nc#698:\
	:s0#9772:b0#8192:f0#1024:\
	:se#256:rm#3600:
#####################################################################
# The 9153B is a 20 MByte winchester disc with a built-in 3.5" double-sided
# 9122S flexible disc drive.
#	(See the hp9122 discussion above for formatting the microfloppy.)
# SS/80 Protocol
#
# Interleave 1 (always)
#
# The configuration switch setting on the reverse panel allows the user to
# select several alternatives in formatting the disc.  Several different
# size volumes are possible - which will require separate disktab entries.
# We give an example below for one popular configuration:
#
# Configuration Switch Setting: 0
#
hp9153B:\
	:4 MB reserved for swap & boot:ns#7:nt#2:nc#1257:\
	:s0#17598:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9153B_noreserve|hp9153B_noswap:\
	:no swap or boot:ns#7:nt#2:nc#1404:\
	:s0#19656:b0#8192:f0#1024:\
	:se#256:rm#3600:
#
# Configuration Switch Setting #5
#	Two volumes:  Vol 0:   (5 MBytes)
#			    28 sectors/track (256 bytes/sector)
#			     2 tracks/cylinder
#			   351 cylinders
#
#		      Vol 1:   (15.1 MBytes)
#			    28 sectors/track (256 bytes/sector)
#			     2 tracks/cylinder
#			  1053 cylinders
#
hp9153B_CS5_V0:\
	:vol 0 (5 MB), NO swap or boot:ns#7:nt#2:nc#351:\
	:s0#4914:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9153B_CS5_V1:\
	:vol1 (15.1 MB), 2 MB reserved for swap & boot:ns#7:nt#2:nc#906:\
	:s0#12684:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9153B_CS5_V1_noreserve|hp9153B_CS5_V1_noswap:\
	:vol1 (15.1 MB), NO swap or boot:ns#7:nt#2:nc#1053:\
	:s0#14742:b0#8192:f0#1024:\
	:se#256:rm#3600:
#####################################################################
# The 9153C is a 10, 20 or 40 MByte winchester disc with an optional
# built-in 3.5" double-sided  9122C flexible disc drive.
# 9153C Options 010 and 011 specify a 10 Mbyte hard disc.
# 9153C Options 020 and 021 specify a 20 Mbyte hard disc.
# 9153C Options 040 and 041 specify a 40 Mbyte hard disc.
# 9153C Options 011, 021 and 041 delete the 3.5" microfloppy unit.
# (Note: There is no 9154C.)
# The 10 and 20 Mb models may be upgraded to 30 and 40 Mbytes respectively,
# by installing a 9153M 20Mb disc assembly.  This configuration is entered
# here as "9153C#030", although no such option actually exists.
# (See the hp9122 discussion above for formatting the microfloppy.)
# SS/80 Protocol
#
# Interleave 1
#
# The configuration switch setting on the reverse panel allows the user
# to select several alternatives in formatting the disc.  Several
# different size volumes are possible - which will require separate
# disktab entries. We give an example below for one popular configuration:
#
# Configuration Switch Setting: 0
#
hp9153C|hp91532|hp9153C#040|hp9153C#041:\
	:8 MB reserved for swap & boot:ns#7:nt#2:nc#2222:\
	:s0#31108:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#040_noreserve|hp9153C#040_noswap:\
	:no swap or boot:ns#7:nt#2:nc#2808:\
	:s0#39312:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#041_noreserve|hp9153C#041_noswap:\
	:no swap or boot:ns#7:nt#2:nc#2808:\
	:s0#39312:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#030|hp9153C#031:\
	:6 MB reserved for swap & boot:ns#7:nt#2:nc#1665:\
	:s0#23310:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#030_noreserve|hp9153C#030_noswap:\
	:no swap or boot:ns#7:nt#2:nc#2104:\
	:s0#29456:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#031_noreserve|hp9153C#031_noswap:\
	:no swap or boot:ns#7:nt#2:nc#2104:\
	:s0#29456:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#020|hp9153C#021:\
	:4 MB reserved for swap & boot:ns#7:nt#2:nc#1111:\
	:s0#15554:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#020_noreserve|hp9153C#020_noswap:\
	:no swap or boot:ns#7:nt#2:nc#1404:\
	:s0#19656:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#021_noreserve|hp9153C#021_noswap:\
	:no swap or boot:ns#7:nt#2:nc#1404:\
	:s0#19656:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#010_noreserve|hp9153C#010_noswap:\
	:no swap or boot:ns#7:nt#2:nc#698:\
	:s0#9772:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#011_noreserve|hp9153C#011_noswap:\
	:no swap or boot:ns#7:nt#2:nc#698:\
	:s0#9772:b0#8192:f0#1024:\
	:se#256:rm#3000:
#
# Configuration Switch Setting #7
#	Two volumes:  Vol 0:   (6 MBytes)
#			    28 sectors/track (256 bytes/sector)
#			     2 tracks/cylinder
#			   420 cylinders
#
#		      Vol 1:   (34.2 MBytes)
#			    28 sectors/track (256 bytes/sector)
#			     2 tracks/cylinder
#			  2388 cylinders
#
hp9153C#040_CS5_V0:|hp9153C#041_CS5_V0:\
	:vol 0 (6 MB), NO swap or boot:ns#7:nt#2:nc#420:\
	:s0#5880:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#040_CS5_V1:|hp9153C#040_CS5_V1:\
	:vol1 (34.2 MB), 2 MB reserved for swap & boot:ns#7:nt#2:nc#1949:\
	:s0#27286:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#040_CS5_V1_noreserve:|hp9153C#041_CS5_V1_noreserve:\
	:vol1 (34.2 MB), NO swap or boot:ns#7:nt#2:nc#2388:\
	:s0#33432:b0#8192:f0#1024:\
	:se#256:rm#3000:
hp9153C#040_CS5_V1_noswap:|hp9153C#041_CS5_V1_noswap:\
	:vol1 (34.2 MB), NO swap or boot:ns#7:nt#2:nc#2388:\
	:s0#33432:b0#8192:f0#1024:\
	:se#256:rm#3000:
###########################################
#					  #
#	       AMIGO DISCS		  #
#					  #
###########################################
hp7920:\
	:10 MB reserved for swap & boot:ns#12:nt#5:nc#644:\
	:s0#38640:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7920_noreserve|hp7920_noswap:\
	:no swap or boot:ns#12:nt#5:nc#815:\
	:s0#48900:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp7925:\
	:18 MB reserved for swap & boot:ns#16:nt#9:nc#687:\
	:s0#98928:b0#8192:f0#1024:\
	:se#256:rm#2700:
hp7925_30MB:\
	:30 MB reserved for swap & boot:ns#16:nt#9:nc#601:\
	:s0#86544:b0#8192:f0#1024:\
	:se#256:rm#2700:
hp7925_noreserve|hp7925_noswap:\
	:no swap or boot:ns#16:nt#9:nc#815:\
	:s0#117360:b0#8192:f0#1024:\
	:se#256:rm#2700:
###########################################################################
# The 9121D and 9121S are 270 KByte 3.5" single-sided flexible disc drives.
# The 9121D contains two (2) drives (at unit 0 and unit 1).
# Amigo Protocol
# Interleave 2
# Notes:  Before a 3.5" flexible disc is used, it must be formatted.
#
hp9121|hp9121_noreserve|hp9121_noswap:\
	:no swap or boot:ns#4:nt#1:nc#66:\
	:s0#264:b0#8192:f0#1024:\
	:se#256:rm#120:
###############################################################
# The hp9133A, hp9134A and hp9133A, hp9134B are 5 and 10 MByte
# discs.  The 9133A and 9133B have built-in 3.5" single-sided
# flexible disc drives.	 The 9134A and 9134B have the identical
# hard disc characteristics to the hp9133A and hp9133B.
# Amigo Protocol
#
# The 9133/4A comes in two formats - standard (4 units of 1.2 MBytes)
# and option 010 (1 unit of 4.6 MBytes).  Using the standard format,
# the units are addressed by referencing the appropriate bit in the
# minor number.
#
hp9133A|hp9134A:\
	:no swap or boot:ns#15:nt#1:nc#75:\
	:s0#1125:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9133A_F010|hp9134A_F010:\
	:no swap or boot:ns#31:nt#1:nc#152:\
	:s0#4712:b0#8192:f0#1024:\
	:se#256:rm#3600:
hp9133B|hp9134B:\
	:no swap or boot:ns#31:nt#1:nc#305:\
	:s0#9455:b0#8192:f0#1024:\
	:se#256:rm#3600:
#######################################################################
# The 9133/4XV is a 15 MByte winchester disc (the 9133XV has a built-in
# 3.5" single-sided flexible disc drive).
# Amigo Protocol
#
hp9133XV|hp9134XV:\
	:no swap or boot:ns#9:nt#5:nc#315:\
	:s0#14175:b0#8192:f0#1024:\
	:se#256:rm#3600:
#######################################################
# The 9895 is a 1.2 MByte 8" double-sided flexible disc
# Amigo Protocol
#
hp9895:\
	:no swap or boot:ns#15:nt#1:nc#75:\
	:s0#1125:b0#8192:f0#1024:\
	:se#256:rm#360:
###############################################################
# SCSI Discs						      #
# The Discs described below this line use the SCSI interface  #
# and the SCSI protocol for direct access disc drives.	SCSI  #
# is an	 industry  standard  protocol that is used by a wide  #
# variety of disc vendors.  The following section references  #
# discs manufactured by HP and fully supported in HP systems. #
# Related documentation can be found in:		      #
#    * Small Computer System Interface:			      #
#	  ANSI X3T9.2/82-2(Rev 17B)			      #
#    * Common Command Set (CCS) of the Small Computer System  #
#	  Interface (SCSI): ANSI X3T9.2/85-52 (Rev 4.B)	      #
#    * HP Common SCSI Interface Specification		      #
###############################################################
# The HP 7957/8/9 Disc Drives are reliable,  low cost,	high  #
# capacity and high performance mass storage devices.  These  #
# 5.25" drives use 2, 3 or 6 platters.	There are 1643 data   #
# tracks per surface, with 64 (256 byte) sectors per track.   #
###############################################################
# The HP7957S has 4 surfaces (2 platters)
# Total formatted capacity: 107.7 MBytes
HP7957S_noreserve|HP7957S_noswap:\
	:No swap or boot:ns#16:nt#4:nc#1643:\
	:s0#105152:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7957S_noreserve|hp7957S_noswap:\
	:No swap or boot:ns#16:nt#4:nc#1643:\
	:s0#105152:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7957S|HP_7957S:\
	:16 MBytes reserved for swap & boot:ns#16:nt#4:nc#1387:\
	:s0#88768:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7957S_24MB|HP7957S_24MB:\
	:24 MBytes reserved for swap & boot:ns#16:nt#4:nc#1259:\
	:s0#80576:b0#8192:f0#1024:\
	:se#256:rm#3350:
###############################################
# The HP7958S has 6 surfaces (3 platters)
# Total formatted capacity: 161.5 MBytes
hp7958S_noreserve|hp7958S_noswap|HP7958S_noreserve|HP7958S_noswap:\
	:No swap or boot:ns#16:nt#6:nc#1643:\
	:s0#157728:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7958S|HP_7958S:\
	:24 MBytes reserved for swap & boot:ns#16:nt#6:nc#1387:\
	:s0#133152:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7958S_32MB|HP7958S_32MB:\
	:32 MBytes reserved for swap & boot:ns#16:nt#6:nc#1301:\
	:s0#124896:b0#8192:f0#1024:\
	:se#256:rm#3350:
###############################################
# The HP7959S has 12 surfaces (6 platters)
# Total formatted capacity: 323 MBytes
hp7959S_noreserve|hp7959S_noswap|HP7959S_noreserve|HP7959S_noswap:\
	:No swap or boot:ns#16:nt#12:nc#1643:\
	:s0#315456:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7959S|HP_7959S:\
	:42 MBytes reserved for swap & boot:ns#16:nt#12:nc#1419:\
	:s0#272448:b0#8192:f0#1024:\
	:se#256:rm#3350:
hp7959S_32MB|HP7959S_32MB:\
	:32 MBytes reserved for swap & boot:ns#16:nt#12:nc#1472:\
	:s0#282624:b0#8192:f0#1024:\
	:se#256:rm#3350:
###############################################
# The HP Series 6300 model 650/A is a Magneto-optical
# drive with 2 surfaces and uses the SCSI interface.
# The mechanism can only access one surface at a time.
# The media is removeable (5.25"), with an estimated
# shelf life of 10 years. Media has a write-protect tab.
# Two formats are available:
#	 512  bytes/sector
#	1024  bytes/sector
# Total formatted capacity: 322.1 MBytes/surface  (644.2 MBytes both sides)
# Physical Geometry for the 1024 bytes/sector media:
#	Bytes / sector	  1024
#	Sectors / track	  17
#	Capacity	  314569 sectors
#		       or 322.1 MBytes/surface	(644.2 MBytes both sides)
#
# Physical Geometry for the 512	 bytes/sector media:
#	Bytes / sector	  512
#	Capacity	  576999 sectors
#		       or 295.4 MBytes/surface
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
hpS6300.650A|hpS6300.650A_noreserve|hpS6300.650A_noswap:\
	:No swap or boot:ns#17:nt#12:nc#1542:\
	:s0#314568:b0#8192:f0#1024:\
	:se#1024:rm#2400:
HPS6300.650A|HPS6300.650A_noreserve|HPS6300.650A_noswap:\
	:No swap or boot:ns#17:nt#12:nc#1542:\
	:s0#314568:b0#8192:f0#1024:\
	:se#1024:rm#2400:
HP_S6300.650A|HP_S6300.650A_noreserve|HP_S6300.650A_noswap:\
	:No swap or boot:ns#17:nt#12:nc#1542:\
	:s0#314568:b0#8192:f0#1024:\
	:se#1024:rm#2400:
hpS6300.650A_512|hpS6300.650A_512_noreserve|hpS6300.650A_512_noswap:\
	:No swap or boot:ns#31:nt#12:nc#775:\
	:s0#288300:b0#8192:f0#1024:\
	:se#512:rm#2400:
HPS6300.650A_512|HPS6300.650A_512_noreserve|HPS6300.650A_512_noswap:\
	:No swap or boot:ns#31:nt#12:nc#775:\
	:s0#288300:b0#8192:f0#1024:\
	:se#512:rm#2400:
HP_S6300.650A_512|HP_S6300.650A_512_noreserve|HP_S6300.650A_512_noswap:\
	:No swap or boot:ns#31:nt#12:nc#775:\
	:s0#288300:b0#8192:f0#1024:\
	:se#512:rm#2400:
#####################################################
# It is not recommended to use the 650/A drive as the
# root device.	For convenience an entry is provided
# in case the user requires it for special situations.
hpS6300.650A_32MB|HPS6300.650A_32MB|HP_S6300.650A_32MB:\
	:32 MBytes reserved for swap & boot:ns#17:nt#12:nc#1381:\
	:s0#281724:b0#8192:f0#1024:\
	:se#1024:rm#2400:
#####################################################
# Rodime disk drive.
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
rodimeRO3000T_noreserve|RODIME_RO3000T_noreserve:\
	:No swap or boot:ns#16:nt#9:nc#1424:\
	:s0#205056:b0#8192:f0#1024:\
	:se#512:rm#3600:
rodimeRO3000T_noswap|RODIME_RO3000T_noswap:\
	:No swap or boot:ns#16:nt#9:nc#1424:\
	:s0#205056:b0#8192:f0#1024:\
	:se#512:rm#3600:
rodimeRO3000T|RODIME_RO3000T|rodimeRO3000T_32MB|RODIME_RO3000T_32MB:\
	:32 Mbytes reserved for swap & boot:ns#16:nt#9:nc#1196:\
	:s0#172224:b0#8192:f0#1024:\
	:se#512:rm#3600:
rodimeRO3000T_44MB|RODIME_RO3000T_44MB:\
	:44 Mbytes reserved for swap & boot:ns#16:nt#9:nc#1111:\
	:s0#159984:b0#8192:f0#1024:\
	:se#512:rm#3600:
rodimeRO3000T_50MB|RODIME_RO3000T_50MB:\
	:50 Mbytes reserved for swap & boot:ns#16:nt#9:nc#1068:\
	:s0#153792:b0#8192:f0#1024:\
	:se#512:rm#3600:
rodimeRO3000T_64MB|RODIME_RO3000T_64MB:\
        :64 MBbytes reserved for swap & boot:ns#16:nt#9:nc#968:\
        :s0#139392:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Quantum 210MB 3.5in SCSI drive with ZBR
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
# ns = (average of 8 zones) 25 sectors/track
# nt = 7 r/w heads ( 8th head servo surface )
# nc = 1167 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
QUANTUM_PD210S_noreserve:\
        :No swap or boot:ns#25:nt#7:nc#1167:\
        :s0#204225:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD210S_noswap:\
        :No swap or boot:ns#25:nt#7:nc#1167:\
        :s0#204225:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD210S|QUANTUM_PD210S_36MB:\
        :36 Mb reserved for swap & boot:ns#25:nt#7:nc#956:\
        :s0#167300:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD210S_42MB:\
        :42 Mb reserved for swap & boot:ns#25:nt#7:nc#921:\
        :s0#161175:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD210S_50MB:\
        :50 Mb reserved for swap & boot:ns#25:nt#7:nc#874:\
        :s0#152950:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD210S_66MB:\
        :66 Mb reserved for swap & boot:ns#25:nt#7:nc#781:\
        :s0#136675:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Quantum 425 MB SCSI drive with ZBR
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
# ns = (average of 8 zones) 30 sectors/track
# nt = 9 r/w heads ( 10th head servo surface )
# nc = 1542 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
QUANTUM_PD425S_noreserve:\
        :No swap or boot:ns#30:nt#9:nc#1527:\
        :s0#412290:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD425S_noswap:\
        :No swap or boot:ns#30:nt#9:nc#1527:\
        :s0#412290:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD425S_40MB:\
        :40 Mb reserved for swap & boot:ns#30:nt#9:nc#1376:\
        :s0#371520:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD425S|QUANTUM_PD425S_50MB:\
        :50 Mb reserved for swap & boot:ns#30:nt#9:nc#1338:\
        :s0#361260:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD425S_70MB:\
        :70 Mb reserved for swap & boot:ns#30:nt#9:nc#1262:\
        :s0#340740:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD425S_90MB:\
        :90 Mb reserved for swap & boot:ns#30:nt#9:nc#1184:\
        :s0#319680:b0#8192:f0#1024:\
        :se#512:rm#3600:
QUANTUM_PD425S_100MB:\
        :100 Mb reserved for swap & boot:ns#30:nt#9:nc#1148:\
        :s0#309960:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Micropolis 660 Mb SCSI Drive
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
# ns = 28 sectors/track
# nt = 15 r/w heads ( 16th head servo surface )
# nc = 1552 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
MICROP_1588T_noreserve|MICROP_1588T_noswap:\
        :No swap or boot:ns#28:nt#15:nc#1552:\
        :s0#651840:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588T_42MB:\
        :42 Mb reserved for swap & boot:ns#28:nt#15:nc#1450:\
        :s0#609000:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588T|MICROP_1588T_64MB:\
        :64 Mb reserved for swap & boot:ns#28:nt#15:nc#1396:\
        :s0#586320:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588T_96MB:\
        :96 Mb reserved for swap & boot:ns#28:nt#15:nc#1318:\
        :s0#553560:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588T_120MB:\
        :120 Mb reserved for swap & boot:ns#28:nt#15:nc#1259:\
        :s0#528780:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588T_150MB:\
        :150 Mb reserved for swap & boot:ns#28:nt#15:nc#1186:\
        :s0#498120:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Micropolis 660 Mb SCSI Drive
# Set rotdelay = 1 ms for optimal file system perf (see tunefs(1M))
#
# ns = 28 sectors/track
# nt = 15 r/w heads ( 16th head servo surface )
# nc = 1552 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
MICROP_1588-15MB1047604_noreserve|MICROP_1588-15MB1047604_noswap:\
        :No swap or boot:ns#28:nt#15:nc#1552:\
        :s0#651840:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047604_42MB:\
        :42 Mb reserved for swap & boot:ns#28:nt#15:nc#1450:\
        :s0#609000:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047604|MICROP_1588-15MB1047604_64MB:\
        :64 Mb reserved for swap & boot:ns#28:nt#15:nc#1396:\
        :s0#586320:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047604_96MB:\
        :96 Mb reserved for swap & boot:ns#28:nt#15:nc#1318:\
        :s0#553560:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047604_120MB:\
        :120 Mb reserved for swap & boot:ns#28:nt#15:nc#1259:\
        :s0#528780:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047604_150MB:\
        :150 Mb reserved for swap & boot:ns#28:nt#15:nc#1186:\
        :s0#498120:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Micropolis 660 Mb SCSI Drive (AOXC fw)
# Set rotdelay = 1 ms for optimal file system perf (see tunefs(1M))
#
# ns = 28 sectors/track
# nt = 15 r/w heads ( 16th head servo surface )
# nc = 1552 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
MICROP_1588-15MB1047602_noreserve|MICROP_1588-15MB1047602_noswap:\
        :No swap or boot:ns#28:nt#15:nc#1552:\
        :s0#651840:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047602_42MB:\
        :42 Mb reserved for swap & boot:ns#28:nt#15:nc#1450:\
        :s0#609000:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047602|MICROP_1588-15MB1047602_64MB:\
        :64 Mb reserved for swap & boot:ns#28:nt#15:nc#1396:\
        :s0#586320:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047602_96MB:\
        :96 Mb reserved for swap & boot:ns#28:nt#15:nc#1318:\
        :s0#553560:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047602_120MB:\
        :120 Mb reserved for swap & boot:ns#28:nt#15:nc#1259:\
        :s0#528780:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047602_150MB:\
        :150 Mb reserved for swap & boot:ns#28:nt#15:nc#1186:\
        :s0#498120:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Micropolis 660 Mb SCSI Drive (AO0C fw)
# Set rotdelay = 1 ms for optimal file system perf (see tunefs(1M))
#
# ns = 28 sectors/track
# nt = 15 r/w heads ( 16th head servo surface )
# nc = 1552 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
MICROP_1588-15MB1047601_noreserve|MICROP_1588-15MB1047601_noswap:\
        :No swap or boot:ns#28:nt#15:nc#1552:\
        :s0#651840:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047601_42MB:\
        :42 Mb reserved for swap & boot:ns#28:nt#15:nc#1450:\
        :s0#609000:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047601|MICROP_1588-15MB1047601_64MB:\
        :64 Mb reserved for swap & boot:ns#28:nt#15:nc#1396:\
        :s0#586320:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047601_96MB:\
        :96 Mb reserved for swap & boot:ns#28:nt#15:nc#1318:\
        :s0#553560:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047601_120MB:\
        :120 Mb reserved for swap & boot:ns#28:nt#15:nc#1259:\
        :s0#528780:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1588-15MB1047601_150MB:\
        :150 Mb reserved for swap & boot:ns#28:nt#15:nc#1186:\
        :s0#498120:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# Micropolis 1.4 Gb SCSI Drive
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
# ns = 44 sectors/track
# nt = 15 r/w heads ( 16th head servo surface )
# nc = 1986 total data cyl
# s0 = total capacity / 1024
# b0 f0 = 8K 1K file system
# se = 512 byte sectors
# rm = 3600 rpm
#
MICROP_1528_noreserve:\
        :No swap or boot:ns#44:nt#15:nc#1986:\
        :s0#1310760:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_noswap:\
        :No swap or boot:ns#44:nt#15:nc#1986:\
        :s0#1310760:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_42MB:\
        :42 Mb reserved for swap & boot:ns#44:nt#15:nc#1920:\
        :s0#1267200:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_64MB:\
        :64 Mb reserved for swap & boot:ns#44:nt#15:nc#1886:\
        :s0#1244760:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_96MB:\
        :96 Mb reserved for swap & boot:ns#44:nt#15:nc#1837:\
        :s0#1212420:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528|MICROP_1528_120MB:\
        :120 Mb reserved for swap & boot:ns#44:nt#15:nc#1799:\
        :s0#1187340:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_150MB:\
        :150 Mb reserved for swap & boot:ns#44:nt#15:nc#1753:\
        :s0#1156980:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_175MB:\
        :175 Mb reserved for swap & boot:ns#44:nt#15:nc#1714:\
        :s0#1131240:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_200MB:\
        :200 Mb reserved for swap & boot:ns#44:nt#15:nc#1675:\
        :s0#1105500:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_225MB:\
        :225 Mb reserved for swap & boot:ns#44:nt#15:nc#1637:\
        :s0#1080420:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_250MB:\
        :250 Mb reserved for swap & boot:ns#44:nt#15:nc#1598:\
        :s0#1054680:b0#8192:f0#1024:\
        :se#512:rm#3600:
MICROP_1528_300MB:\
        :300 Mb reserved for swap & boot:ns#44:nt#15:nc#1520:\
        :s0#1003200:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################################################
# HP Wolverine 400 ZBR
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
# Notch 0: 444 (+10 reserved) cylinders at 72 sectors per track
# Notch 1: 567 ( +9 reserved) cylinders at 60 sectors per track
# Notch 2: 535 ( +9 reserved) cylinders at 48 sectors per track
#
hpC2235_noreserve|HP_C2235_noreserve:\
        :No swap or boot:ns#30:nt#9:nc#1527:\
        :s0#412290:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2235_noswap|HP_C2235_noswap:\
        :No swap or boot:ns#30:nt#9:nc#1527:\
        :s0#412290:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2235_40MB|HP_C2235_40MB:\
        :40 MB swap:ns#30:nt#9:nc#1376:\
        :s0#371520:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2235|HP_C2235|hpC2235_50MB|HP_C2235_50MB:\
        :50 MB swap:ns#30:nt#9:nc#1338:\
        :s0#361260:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2235_70MB|HP_C2235_70MB:\
        :70 MB swap:ns#30:nt#9:nc#1262:\
        :s0#340740:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2235_90MB|HP_C2235_90MB:\
        :90 MB swap:ns#30:nt#9:nc#1184:\
        :s0#319680:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2235_100MB|HP_C2235_100MB:\
        :100 MB swap:ns#30:nt#9:nc#1148:\
        :s0#309960:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2233_noreserve|HP_C2233_noreserve:\
        :No swap or boot:ns#30:nt#5:nc#1360:\
        :s0#204000:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2233_noswap|HP_C2233_noswap:\
        :No swap or boot:ns#30:nt#5:nc#1360:\
        :s0#204000:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2233|HP_C2233|hpC2233_36MB|HP_C2233_36MB:\
        :36 MB swap:ns#30:nt#5:nc#1116:\
        :s0#167400:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2233_42MB|HP_C2233_42MB:\
        :42 MB swap:ns#30:nt#5:nc#1076:\
        :s0#161400:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2233_50MB|HP_C2233_50MB:\
        :50 MB swap:ns#30:nt#5:nc#1020:\
        :s0#153000:b0#8192:f0#1024:\
        :se#512:rm#3600:
hpC2233_66MB|HP_C2233_66MB:\
        :66 MB swap:ns#30:nt#5:nc#911:\
        :s0#136650:b0#8192:f0#1024:\
        :se#512:rm#3600:
###############################################
# HP Coyote III
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
hp97560_noreserve|HP_97560_noreserve:\
        :No swap or boot:ns#36:nt#19:nc#1916:\
        :s0#1310544:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_noswap|HP_97560_noswap:\
        :No swap or boot:ns#36:nt#19:nc#1916:\
        :s0#1310544:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_42MB|HP_97560_42MB:\
        :42 MB swap:ns#36:nt#19:nc#1852:\
        :s0#1266768:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_64MB|HP_97560_64MB:\
        :64 MB swap:ns#36:nt#19:nc#1820:\
        :s0#1244880:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_96MB|HP_97560_96MB:\
        :96 MB swap:ns#36:nt#19:nc#1772:\
        :s0#1212048:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560|HP_97560|hp97560_120MB|HP_97560_120MB:\
        :120 MB swap:ns#36:nt#19:nc#1737:\
        :s0#1188108:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_150MB|HP_97560_150MB:\
        :150 MB swap:ns#36:nt#19:nc#1692:\
        :s0#1157328:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_175MB|HP_97560_175MB:\
        :175 MB swap:ns#36:nt#19:nc#1654:\
        :s0#1131336:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_200MB|HP_97560_200MB:\
        :200 MB swap:ns#36:nt#19:nc#1617:\
        :s0#1106028:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_225MB|HP_97560_225MB:\
        :225 MB swap:ns#36:nt#19:nc#1580:\
        :s0#1080720:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_250MB|HP_97560_250MB:\
        :250 MB swap:ns#36:nt#19:nc#1542:\
        :s0#1054728:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97560_300MB|HP_97560_300MB:\
        :300 MB swap:ns#36:nt#19:nc#1468:\
        :s0#1004112:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556_noreserve|HP_97556_noreserve:\
        :No swap or boot:ns#36:nt#11:nc#1646:\
        :s0#651816:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556_noswap|HP_97556_noswap:\
        :No swap or boot:ns#36:nt#11:nc#1646:\
        :s0#651816:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556_42MB|HP_97556_42MB:\
        :42 MB swap:ns#36:nt#11:nc#1538:\
        :s0#609048:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556|HP_97556|hp97556_64MB|HP_97556_64MB:\
        :64 MB swap:ns#36:nt#11:nc#1480:\
        :s0#586080:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556_96MB|HP_97556_96MB:\
        :96 MB swap:ns#36:nt#11:nc#1398:\
        :s0#553608:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556_120MB|HP_97556_120MB:\
        :120 MB swap:ns#36:nt#11:nc#1335:\
        :s0#528660:b0#8192:f0#1024:\
        :se#512:rm#4002:
hp97556_150MB|HP_97556_150MB:\
        :150 MB swap:ns#36:nt#11:nc#1258:\
        :s0#498168:b0#8192:f0#1024:\
        :se#512:rm#4002:
################################################
#Corsair disk: C1716C
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
hpC1716C|hpC1716C_noreserve|hpC1716C_noswap:\
	:No swap or boot:ns#17:nt#12:nc#1542:\
	:s0#314568:b0#8192:f0#1024:\
	:se#1024:rm#3600:
HPC1716C|HPC1716C_noreserve|HPC1716C_noswap:\
	:No swap or boot:ns#17:nt#12:nc#1542:\
	:s0#314568:b0#8192:f0#1024:\
	:se#1024:rm#3600:
HP_C1716C|HP_C1716C_noreserve|HP_C1716C_noswap:\
	:No swap or boot:ns#17:nt#12:nc#1542:\
	:s0#314568:b0#8192:f0#1024:\
	:se#1024:rm#3600:
hpC1716C_512|hpC1716C_512_noreserve|hpC1716C_512_noswap:\
	:No swap or boot:ns#31:nt#12:nc#775:\
	:s0#288300:b0#8192:f0#1024:\
	:se#512:rm#3600:
HPC1716C_512|HPC1716C_512_noreserve|HPC1716C_512_noswap:\
	:No swap or boot:ns#31:nt#12:nc#775:\
	:s0#288300:b0#8192:f0#1024:\
	:se#512:rm#3600:
HP_C1716C_512|HP_C1716C_512_noreserve|HP_C1716C_512_noswap:\
	:No swap or boot:ns#31:nt#12:nc#775:\
	:s0#288300:b0#8192:f0#1024:\
	:se#512:rm#3600:
#####################################################
# It is not recommended to use the C1716C drive as the
# root device.	For convenience an entry is provided
# in case the user requires it for special situations.
hpC1716C_32MB|HPC1716C_32MB|HP_C1716C_32MB:\
	:32 MBytes reserved for swap & boot:ns#17:nt#12:nc#1381:\
	:s0#281724:b0#8192:f0#1024:\
	:se#1024:rm#3600:
###############################################
# HP C2247
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
hpC2247_noswap|HP_C2247_noswap|hpC2247_noreserve|HP_C2247_noreserve:\
        :No swap or boot:ns#38:nt#13:nc#2075:\
        :s0#1025050:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_42MB|HP_C2247_42MB:\
        :42 MB reserved for swap & boot:ns#38:nt#13:nc#1988:\
        :s0#982072:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_64MB|HP_C2247_64MB:\
        :64 MB reserved for swap & boot:ns#38:nt#13:nc#1943:\
        :s0#959842:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_96MB|HP_C2247_96MB|hpC2247|HP_C2247:\
        :96 MB reserved for swap & boot:ns#38:nt#13:nc#1876:\
        :s0#926744:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_120MB|HP_C2247_120MB:\
        :120 MB reserved for swap & boot:ns#38:nt#13:nc#1826:\
        :s0#902044:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_150MB|HP_C2247_150MB:\
        :150 MB reserved for swap & boot:ns#38:nt#13:nc#1764:\
        :s0#871416:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_200MB|HP_C2247_200MB:\
        :200 MB reserved for swap & boot:ns#38:nt#13:nc#1661:\
        :s0#820534:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC2247_300MB|HP_C2247_300MB:\
        :300 MB reserved for swap & boot:ns#38:nt#13:nc#1453:\
        :s0#717782:b0#8192:f0#1024:\
        :se#512:rm#5400:
###############################################
# HP C3010
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
hpC3010_noswap|HP_C3010_noswap|hpC3010_noreserve|HP_C3010_noreserve:\
        :No swap or boot:ns#44:nt#19:nc#2336:\
        :s0#1952896:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC3010_64MB|HP_C3010_64MB:\
        :64 MB reserved for swap & boot:ns#44:nt#19:nc#2256:\
        :s0#1886016:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC3010_96MB|HP_C3010_96MB:\
        :96 MB reserved for swap & boot:ns#44:nt#19:nc#2218:\
        :s0#1854248:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC3010_120MB|HP_C3010_120MB:\
        :120 MB reserved for swap & boot:ns#44:nt#19:nc#2189:\
        :s0#1830004:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC3010_176MB|HP_C3010_176MB|hpC3010|HP_C3010:\
        :176 MB reserved for swap & boot:ns#44:nt#19:nc#2120:\
        :s0#1772320:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC3010_250MB|HP_C3010_250MB:\
        :250 MB reserved for swap & boot:ns#44:nt#19:nc#2030:\
        :s0#1697080:b0#8192:f0#1024:\
        :se#512:rm#5400:
hpC3010_376MB|HP_C3010_376MB:\
        :376 MB reserved for swap & boot:ns#44:nt#19:nc#1875:\
        :s0#1567500:b0#8192:f0#1024:\
        :se#512:rm#5400:
###############################################
# MICROP 1924
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
MICROP_1924_noswap|MICROP_1924_noreserve:\
        :No swap or boot:ns#44:nt#19:nc#2336:\
        :s0#1952896:b0#8192:f0#1024:\
        :se#512:rm#5400:
MICROP_1924_64MB:\
        :64 MB reserved for swap & boot:ns#44:nt#19:nc#2256:\
        :s0#1886016:b0#8192:f0#1024:\
        :se#512:rm#5400:
MICROP_1924_96MB:\
        :96 MB reserved for swap & boot:ns#44:nt#19:nc#2218:\
        :s0#1854248:b0#8192:f0#1024:\
        :se#512:rm#5400:
MICROP_1924_120MB:\
        :120 MB reserved for swap & boot:ns#44:nt#19:nc#2189:\
        :s0#1830004:b0#8192:f0#1024:\
        :se#512:rm#5400:
MICROP_1924_176MB|MICROP_1924:\
        :176 MB reserved for swap & boot:ns#44:nt#19:nc#2120:\
        :s0#1772320:b0#8192:f0#1024:\
        :se#512:rm#5400:
MICROP_1924_250MB:\
        :250 MB reserved for swap & boot:ns#44:nt#19:nc#2030:\
        :s0#1697080:b0#8192:f0#1024:\
        :se#512:rm#5400:
MICROP_1924_376MB:\
        :376 MB reserved for swap & boot:ns#44:nt#19:nc#1875:\
        :s0#1567500:b0#8192:f0#1024:\
        :se#512:rm#5400:
###############################################################################
# QUANT LPS525S
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
QUANTUM_LPS525S_noswap|QUANTUM_LPS525S_noreserve:\
        :No swap or boot:ns#30:nt#9:nc#1895:\
        :s0#511650:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_LPS525S_40MB:\
        :40 MB swap:ns#30:nt#9:nc#1743:\
        :s0#470610:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_LPS525S_50MB:\
        :50 MB swap:ns#30:nt#9:nc#1705:\
        :s0#460350:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_LPS525S|QUANTUM_LPS525S_70MB:\
        :70 MB swap:ns#30:nt#9:nc#1629:\
        :s0#439830:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_LPS525S_90MB:\
        :90 MB swap:ns#30:nt#9:nc#1552:\
        :s0#419040:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_LPS525S_120MB:\
        :120 MB swap:ns#30:nt#9:nc#1439:\
        :s0#388530:b0#8192:f0#1024:\
        :se#512:rm#4500:
###############################################
# QUANTUM PD1050S
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
QUANTUM_PD1050S_noswap|QUANTUM_PD1050S_noreserve:\
        :No swap or boot:ns#38:nt#13:nc#2075:\
        :s0#1025050:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_42MB:\
        :42 MB reserved for swap & boot:ns#38:nt#13:nc#1988:\
        :s0#982072:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_64MB:\
        :64 MB reserved for swap & boot:ns#38:nt#13:nc#1943:\
        :s0#959842:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_96MB|QUANTUM_PD1050S:\
        :96 MB reserved for swap & boot:ns#38:nt#13:nc#1876:\
        :s0#926744:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_120MB:\
        :120 MB reserved for swap & boot:ns#38:nt#13:nc#1826:\
        :s0#902044:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_150MB:\
        :150 MB reserved for swap & boot:ns#38:nt#13:nc#1764:\
        :s0#871416:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_200MB:\
        :200 MB reserved for swap & boot:ns#38:nt#13:nc#1661:\
        :s0#820534:b0#8192:f0#1024:\
        :se#512:rm#4500:
QUANTUM_PD1050S_300MB:\
        :300 MB reserved for swap & boot:ns#38:nt#13:nc#1453:\
        :s0#717782:b0#8192:f0#1024:\
        :se#512:rm#4500:
###############################################################################
# SEAGATE ST3600N
# Set rotdelay = 0 ms for optimal file system perf (see tunefs(1M))
#
SEAGATE_ST3600N_noswap|SEAGATE_ST3600N_noreserve:\
        :No swap or boot:ns#30:nt#9:nc#1895:\
        :s0#511650:b0#8192:f0#1024:\
        :se#512:rm#4500:
SEAGATE_ST3600N_40MB:\
        :40 MB swap:ns#30:nt#9:nc#1743:\
        :s0#470610:b0#8192:f0#1024:\
        :se#512:rm#4500:
SEAGATE_ST3600N_50MB:\
        :50 MB swap:ns#30:nt#9:nc#1705:\
        :s0#460350:b0#8192:f0#1024:\
        :se#512:rm#4500:
SEAGATE_ST3600N|SEAGATE_ST3600N_70MB:\
        :70 MB swap:ns#30:nt#9:nc#1629:\
        :s0#439830:b0#8192:f0#1024:\
        :se#512:rm#4500:
SEAGATE_ST3600N_90MB:\
        :90 MB swap:ns#30:nt#9:nc#1552:\
        :s0#419040:b0#8192:f0#1024:\
        :se#512:rm#4500:
SEAGATE_ST3600N_120MB:\
        :120 MB swap:ns#30:nt#9:nc#1439:\
        :s0#388530:b0#8192:f0#1024:\
        :se#512:rm#4500:
###############################################################################
#									      #
#    SCSI DISCS REFERENCED BELOW THIS POINT WILL NOT BE SUPPORTED ON	      #
#    HP-UX SYSTEMS. THEY HAVE NOT BEEN TESTED AT ALL BY HEWLETT-PACKARD.      #
#    THEY ARE PROVIDED HERE FOR CONVENIENCE AND REFERENCE ONLY.		      #
#									      #
###############################################################################
###############################################
# Conner Cp340
CONNER_noreserve|CONNER_noswap:\
	:no swap or boot:ns#13:nt#4:nc#752:\
	:s0#39104:b0#8192:f0#1024:\
	:se#256:rm#3600:
CONNER_Cp340_noreserve|CONNER_Cp340_noswap:\
	:no swap or boot:ns#13:nt#4:nc#752:\
	:s0#39104:b0#8192:f0#1024:\
	:se#256:rm#3600:
CONNER|CONNER_Cp340:\
	:8 MBytes reserved for swap & boot:ns#13:nt#4:nc#594:\
	:s0#30888:b0#8192:f0#1024:\
	:se#256:rm#3600:
#####################################################
# Maxtor disk drive.
MAXTOR_LXT200_noreserve:\
	:No swap or boot:ns#16:nt#9:nc#1360:\
	:s0#195840:b0#8192:f0#1024:\
	:se#512:rm#3600:
MAXTOR_LXT200_noswap:\
	:No swap or boot:ns#16:nt#9:nc#1360:\
	:s0#195840:b0#8192:f0#1024:\
	:se#512:rm#3600:
MAXTOR_LXT200:\
	:32 Mbytes reserved for swap & boot:ns#16:nt#9:nc#1132:\
	:s0#163008:b0#8192:f0#1024:\
	:se#512:rm#3600:
MAXTOR_LXT200_44MB:\
	:44 Mbytes reserved for swap & boot:ns#16:nt#9:nc#1047:\
	:s0#150768:b0#8192:f0#1024:\
	:se#512:rm#3600:
#####################################################
# Maxtor Disk Drives. The following generated by P.Tenereillo,
# Maxtor Corporation, San Jose, CA, July 9, 1992.
# All of the following entries were tested at Maxtor on HP9000/720
# running HP-UX 8.05. Best results obtained without using SAM.
# Use:
#       mediainit /dev/rdsk/IDs0                 # Recommended for new disks
#       newfs /dev/rdsk/IDs0 MAXTOR_XXXX_XXXXXX  # Select from list below
#       fsck -p /dev/rdsk/IDs0                   # Check new file system
#       mkdir /Your_mount_path                   #
#       mount /dev/dsk/IDs0 /Your_mount_path     #
#       swapon -e -p 1 /dev/dsk/IDs0             # Skip if no swap on this disk
#
# Replace "ID" with the SCSI ID of the device (0-6).
#
# Also make appropriate entry in /etc/checklist file:
#       /dev/dsk/Xs0 /Your_mount_path hfs rw,suid 0 1   # Mount when rebooted
#       /dev/dsk/Xs0 /swap swap end,pri=1 0 0           # Secondary swap device
#
MAXTOR_XT-8760S_noswap:\
        :No swap or boot:ns#27:nt#15:nc#1632:\
        :s0#652050:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_XT-8760S_100MB|MAXTOR_XT-8760S:\
        :100 Mbytes reserved for swap & boot:ns#27:nt#15:nc#1363:\
        :s0#552015:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_XT-8760SH_noswap:\
        :No swap or boot:ns#27:nt#15:nc#1632:\
        :s0#652050:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_XT-8760SH_100MB|MAXTOR_XT-8760SH:\
        :100 Mbytes reserved for swap & boot:ns#27:nt#15:nc#1363:\
        :s0#552015:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_7213-SCSI_noswap:\
        :No swap or boot:ns#31:nt#4:nc#1675:\
        :s0#207700:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_7213-SCSI_64MB|MAXTOR_7213-SCSI:\
        :64 Mbytes reserved for swap & boot:ns#31:nt#4:nc#1147:\
        :s0#142228:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_LXT-340S_noswap:\
        :No swap or boot:ns#31:nt#7:nc#1532:\
        :s0#332444:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_LXT-340S_100MB|MAXTOR_LXT-340S:\
        :100 Mbytes reserved for swap & boot:ns#31:nt#7:nc#1060:\
        :s0#230020:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_LXT-535S_noswap:\
        :No swap or boot:ns#31:nt#11:nc#1532:\
        :s0#522412:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_LXT-535S_100MB|MAXTOR_LXT-535S:\
        :100 Mbytes reserved for swap & boot:ns#31:nt#11:nc#1232:\
        :s0#420112:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_P0-12S_noswap:\
        :No swap or boot:ns#38:nt#15:nc#1791:\
        :s0#1020870:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_P0-12S_64MB|MAXTOR_P0-12S:\
        :64 Mbytes reserved for swap & boot:ns#38:nt#15:nc#1676:\
        :s0#955320:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_P1-17S_noswap:\
        :No swap or boot:ns#44:nt#19:nc#1756:\
        :s0#1468016:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_P1-17S_100MB|MAXTOR_P1-17S:\
        :100 Mbytes reserved for swap & boot:ns#44:nt#19:nc#1633:\
        :s0#1365188:b0#8192:f0#1024:\
        :se#512:rm#3600:
MAXTOR_MXT-540SL_noswap:\
        :No swap or boot:ns#31:nt#7:nc#2434:\
        :s0#528178:b0#8192:f0#1024:\
        :se#512:rm#6300:
MAXTOR_MXT-540SL_100MB|MAXTOR_MXT-540SL:\
        :100 Mbytes reserved for swap & boot:ns#31:nt#7:nc#1962:\
        :s0#425754:b0#8192:f0#1024:\
        :se#512:rm#6300:
MAXTOR_MXT-1240S_noswap:\
        :No swap or boot:ns#32:nt#15:nc#2524:\
        :s0#1211520:b0#8192:f0#1024:\
        :se#512:rm#6300:
MAXTOR_MXT-1240S_100MB|MAXTOR_MXT-1240S:\
        :100 Mbytes reserved for swap & boot:ns#32:nt#15:nc#2290:\
        :s0#1099200:b0#8192:f0#1024:\
        :se#512:rm#6300:
###############################################
#FUJITSU|M1053
#   vendor:	FUJITSU
#   product id: M1053
#   rev level	0700
#   Direct Access Device
#   iso ecma ansi rmb dtq resv rdf
#   0	 0    1	  0   0	  0    1
#   logical block address: 287349
#   bytes per block:	   1024
FUJITSU_noreserve|FUJITSU_noswap:\
	:no swap or boot:ns#35:nt#10:nc#821:\
	:s0#287350:b0#8192:f0#1024:\
	:se#1024:rm#3600:
FUJITSU_M1053_noreserve|FUJITSU_M1053_noswap:\
	:no swap or boot:ns#35:nt#10:nc#821:\
	:s0#287350:b0#8192:f0#1024:\
	:se#1024:rm#3600:
FUJITSU|FUJITSU_M1053:\
	:40 MByte reserved for swap & boot:ns#35:nt#10:nc#703:\
	:s0#246050:b0#8192:f0#1024:\
	:se#1024:rm#3600:
###############################################
#CDC WREN IV (product id: 94171-9)
# type: direct access device
# size: 300423168 bytes
# bytes per sector: 512
# blocks per disk: 586764
# Conforms to SCSI I
# response format: 1
WREN_noreserve|WREN_noswap|WREN_IV_noreserve|WREN_IV_noswap:\
	:No swap or boot:ns#18:nt#9:nc#1811:\
	:s0#293382:b0#8192:f0#1024:\
	:se#1024:rm#3600:
WREN|WREN_IV:\
	:40 MByte reserved for swap & boot:ns#18:nt#9:nc#1558:\
	:s0#252396:b0#8192:f0#1024:\
	:se#1024:rm#3600: